Ortoalresa

The benchtop centrifuge Consul 21 is as an exceptional work tool, processing up to 1.6 liters in a small footprint device.

Supplied with a wide range of accessories which allow for multiple combinations of rotors and and adapters, running on swing out up to 4 tubes of 400 ml, 4 tubes of 100 ml,12 tubes of 50ml, 20 tubes of 30 ml,48 of 15 ml, and 76 tubes of 5 ml, ml,48 de 15 ml, 76 tubes de 5 ml, and on angle fixed from 4 tubes of 250 ml, up to 30 microtubes of 1.5 to 2 ml.

Its induction engine, maintenance free, allows a smooth and quiet operation. Its automatic rotor recognition system , as well as together with the intuitive software make this equipment an indispensable ally in biotechnology, cell culture, clinical analysis, industrial and environmental laboratories. Orto Alresa has developed its own braking system which allows the user to select from 5 up to 180 seconds breaking time depending on the rotor and the sample being analysed.


Download pdf

• Indution motor ,maintenance free.
• Controlled by Micorprocessor.
• Minimun acceleration time.
• Noise level < 60 dB.
• Automatic identification of the rotor:
• Shown on screen max. R.P.M., max F.C.R. and max. capacity, thus avoiding exceeding the maximum speed.
• Temperature regulation from -20 to 40ºC (Cónsul 20 R).
• Lid open programmable: automatically at the end of the run or pressing the lid button.
• Temperature selectable on ºC / F.
• Short cycle speed selectable.

• TFT touch full color screen
• RPM regulation in steps of 100, RCF on 10 xg steps, time from 1 to 99 min. and hold position.
• Up to 16 programs on memory
• Countdown starts at set RPM/RCF selected ,allowing reproducibles , results.
• Screen show the values or graphics of set and update.
• Switches for open lid ,start, stop, enter and exit.
• Messages on screen indicating the centrifuge and accessories state.
• Breaking ramps from 5 to 180 seconds.
• Motorized lid latch.
• Pre-cooling program with temperature selectable (Consul 21R).
• Its shown along centrifugation a wheel as indicator or cycle stage, just on a sight you can see from any place of the lab its state and non stop your work.
• Rotors and adapters list on memory.

• Initial checking of the device and its accessories.
• Centrifugation chamber in stainless steel, guard ring around chamber.
• Lid dropping protection
• Unbalance cut off.
• Double manual emergency release.
• Does not allow run the rotor with open lid,neither open the lid while the rotor runs.
• Air cooled ( only Consul 21).
• Lid for buckets avalaibles.
• Control by RCF(xg): allows to reproduce protocols of other devices, avoiding interferences orginated by R.P.M. values.
• Temperature probe inside the chamber of centrifugation with gas R 404A ( CFC free, Consul 21R).

Community directives:73/23/CEE 89/336/CEE. Standards 61010-2, 61010- 2-020, 61000-3, 61000-4 55011.

code	voltage	frecuency	load/td>	weight	dimensions
CE 111	220-240 V	50-60 Hz	440 W	47 Kg	49x62x39 (h) cm
CE 117	110-120 V	50-60 Hz	440 W	47 Kg	49x62x39 (h) cm
CE 114	220-240 V	56-60 Hz	1040 W	72 Kg	67x77x39 (h) cm
CE 120	110-120 V	50-60 Hz	1040 W	72 Kg	67x77x39 (h) cm