Consul 21R

High capacity on a bench top centrifuge which offer to their users several advantages, up to now only available on devices dedicated to research.The TFT touch screen simplifies the parameter selection; main values appear only in one screen as time, RPM, RCF, acceleration and braking.

The operator menu allows other values adjustment as open lid once the rotor stops, locking RPM/RCF along the run, selection of time from 0 or at set RPM/RCF

Along centrifugation it showed on screen a graphic indicating its status as well as the stage of centrifugation, time to end of process.

The devices included on series Consul 21R are highly functionalsthey can spi up to 4 x 400 ml, 48 tubes of 15 ml, 12 conical tubes of 50 ml and 28 of 15 ml conical, rotor for microplates, microtubes, as well as a wide set of adapters for each one.

Innovating about centrifugation.

User friendliness

  • TFT touch screen easy to read and values selection (RPM on steps of 100, RCF on steps of 10xg), time, temperature (1°C steps), acceleration/deceleration (1 second steps).
  • The screen which indicates the status can be seen from more than 3 m.
  • Rotor and adapters list on memory.
  • Real values on screen of RCF based on accessories configuration.
  • Timer count up/down, from 0 or at “set RPM/RCF” for test reproducibility.
  • Short spin key with speed adjustable.
  • Progressive acceleration and braking selectable by operator up to 175 ramps.
  • Program data protection through password selectable.
  • Automatic rotor recognition.
  • Automatic lid latch lock.
  • Microprocessor controlled.
  • Option: free or locked adjustment of RPM/RCF along the run.

Features

  • Induction motor maintenance free
  • High capacity: Max. Volume 4 x 400 ml.
  • High speed, up to 20.804 xg./14.300 RPM.
  • Quiet: noise level < 60 dB.
  • 15 memories + pre-cooling program.

Safety

  • Lid locking and holding.
  • Imbalance switch off.
  • Manual overriding.
  • Chamber of centrifugation in stainless steel.
  • Viewing and calibration prot in the lid.
  • Several messages keep the operator informed about the device situation.
  • Guard ring between the chamber of centrifugation and the housing.
  • Lid dropping protection.

Cooling

  • Precooling program with rotor spinning and temperature selectable by operator.
  • 4°C at least at max speed with any rotor.
  • Range of temperature -20°C (-4°F) to 40°C (104°F)
  • Scale Celsius or Fahrenheit.
  • Temperature sensor inside the chamber.
  • Gas R 404A HFC.

Standards and EC Directives

EU Directives: 98/79/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU, 2012/19/EU.
Regulation: 1005/2009 & 842/2006.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-1.

Versions

Code Dimensions (mm)(w x d x h) Net weight (Kg) Voltage
(V)
Frecuency
(Hz)
Consumption
(W)
Z max Advisable(Hz)
CE 114 670 770 390 72 220-240 50-60 1200 <|0,446|
CE 120 670 770 390 72 110-120 50-60 1200 <|0,446|

accesorios

  RT 197
id
RT 199
id
RT 238
id
RT 206
id
  + info + info + info + info
ROTOR ANGLE FIXED 45º ANGLE FIXED 30º ANGLE FIXED 30º ANGLE FIXED 45º
Max. capacity 8 x 50 ml. 4 x 250 ml. 6 x 85 ml. 30 x 1,5-2 ml.
RPM 6000 4700 9000 14300
Radius (mm) 149 153 112 96
RCF Max. (xg) 5997 3779 10142 21948
Min.temp. max speed(°C) -2 -3 0 -3
  RT 203
id
RT 205 (1)
id
RT 219
id

  + info + info + info  
ROTOR SWING OUT SWING OUT SWING OUT
Max. capacity 4 x 250 ml. 4 x 400 ml. 12 microplacas
RPM 4200 4000 3500
Radius (mm) 183 180 149
RCF Max. (xg) 3609 3220 2041
Min.temp. max speed(°C) -1 -2 -4
(1) This rotor can be supplied with hermetic lids (RE 405).

We use cookies to improve the experience of our users. Cookies are essential for our site.

If you not change browser settings, you accept its use. + info

I agree